1/2/2023 0 Comments Rslinx classic lite 64 bitChoose the file named “RheonicsSRV_micro820_warc” All the project configurations will be displayed on the screen.Ĥ. Rheonics provides with 1 example ready to work with Modbus TCP/IP as client. Once in the CCW environment go to the “file” tab and select Import project. Open the Connected Component Workbench (CCW) Applicationįigure 7.Unrecognized device for SRV electronic sensor 4. Under the “AB_ETHIP-1, Ethernet” menu, the PLC and an unrecognized device with a yellow question mark will be found.įigure 6. Check for the following screen to be displayed:įigure 5. Scan all network devices by pushing the” Rs Who” Buttonģ. To do this, click on “Rswho” button.įigure 4. Once the software has been installed open the RSLinx Classic software.Ģ.(If CCW software version 12.00.00 is not installed please follow this link for download) 3.1. CCWARC as a basic program for the Modbus TCP/IP integration. This section explains how to navigate in the CCW software to configure the correct network settings. Fill in all the parameters for the Ethernet settings, remember to use valid network parameters.įigure 2. Disable for DHCP, this will allow Static IP AddressĢ.3. For Static IP address go to the “Comm Configure tab” in the RHEONICS CONTROL PANEL in the Ethernet section click the dropdown menu in DHCP and select false (This will disable DHCP function)įigure 1. We recommend using an Ethernet Switch.Ģ.2. Connect Rheonics sensor, PLC, and PC (with RHEONICS CONTROL PANEL software installed) with an Ethernet Cable ( connections-on-smet). Rockwell Automation CCW Version 12.00.00 (includes RSLinx Classic Lite 4.11.00 CPR 9ġ.6. Rheonics SRV, SRD, DVP or DVM w/ Firmware V03.20/0 or higherġ.2. Solution home Integration Modbus TCP/IP Integration with Micro820 Modbus TCP/IP Integration with Micro820
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |